MRC N scale 1.0 amp drop-in decoder for Kato F3 and some F7 locomotives with same chassis as F3 locomotive (not SF road numbers). Replaces Kato original PC board. Easy programming. Complete illustrated instructions included.

Features:

• Directly replaces Kato F3 (and some F7) PC board
• 1.0 amp capacity
• Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses
• Programmable start voltage
• Programmable top voltage
• Programmable acceleration rate
• Programmable deceleration rate
• Programmable 14, 28/128 speed steps
• Supports advanced consisting (CV19)
• Supports programming on the main (OPS mode)
• Compatible with NMRA DCC standards
• Complies with the part 15 of FCC regulations
• Dimensions: 75.5mm x 14.2mm x 6.1mm
• MRC warranty