MRC #0001959 1.0 amp 16-bit N/HO scale plug-in DCC DC* diesel sound decoder with 6 different locomotive sounds and attached 13mm speaker. 16-bit sound technology provides a level of sound reproduction quality and "presence" not previously available.

Easy programming. Complete illustrated instructions included.

Designed to fit most N scale (and small HO scale) diesel locomotives with an NMRA 8-pin DCC socket.

Features:

• 1.0 amp capacity
• 6 types of synchronized prime movers (EMD456E, EMD456, EMD710, Alco244, Alco539T, EMD567)
• 28 accessory functions (F1-F28)
• Adjustable Back-EMF load control with ultra-slow speed control
• Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses
• Programmable user selectable 22 different horns and 8 bells
• Programmable individual sound volumes (16 levels)
• Programmable master sound volume (16 levels)
• Programmable start voltage and top voltage
• Programmable acceleration rate and deceleration rate
• Programmable 14, 28/128 speed steps
• Supports full read back of CVs
• Advance speed table control CV67-CV94
• Kick-start voltage control CV65
• Supports advanced consisting (CV19) and programming on the main (OPS mode)
• Compatible with NMRA DCC standards
• Complies with the part 15 of FCC regulations**
• 13mm speaker included
• MRC warranty**

*With DC operation, only the last programmed prime mover sound will play. To access all sound functions with DC, use the MRC #1200 Tech 6 power pack/sound controller (sold separately).

**See user guide for details