HO scale drop-in dual-mode 16-bit DCC sound decoder by Model Rectifier Corp (MRC) for Atlas Genset locomotives. Replaces the factory installed circuit board. Includes 16x36mm speaker. Easy programming. Complete illustrated installation instructions included.

Features:

• Triple core processor generating three independent diesel Genset prime mover sounds
• 1.5 amp capacity
• 28 accessory functions (F1-F28)
• Programmable choice of 22 different horns and 8 bells
• Programmable individual sound volumes (16 levels)
• Programmable either 2-digit or 4-digit addresses
• Programmable start and top voltages
• Programmable acceleration and deceleration rates
• Back EMF load control
• Supports read back address and CV value
• Programmable 14, 28/128 speed steps
• Selectable factory default speed curve
• Advanced speed control table (CV67-CV94)
• Kick start voltage control (CV65)
• Accessory strobe light effects included
• Replacement ditch light boards supplied for flashing front and rear ditch lights
• Supports advanced consisting (CV19)
• Supports programming on the main (OPS mode)
• Compatible with NMRA DCC standard
• Complies with the part 15 of FCC rule
• 16x36mm speaker included (other sizes sold separately)
• Dimensions: 73.0mm x 17.6mm x 8.4mm
• 6-month MRC warranty

Dual Mode operates on a standard DC power pack to give you synchronized engine sound (only). To access all sound functions with DC, use the MRC BlackBox or Tech 6 power pack (sold separately).